Showing posts with label Engine. Show all posts
Showing posts with label Engine. Show all posts

Saturday, 11 March 2017

Bench Seats

   Since I got Degsy I used it for moving stuff about. Initially for my allotment tools and allotment related activities. Then for my mix of beekeeping and allotment. Then just for beekeeping. I built a shelf between the wheel arches to create a wide platform. This gave me a space under the shelf for a jerry can, deck chairs and tools like shovels, spades and forks.

   Life has moved on and Degsy has been retired from day to day duties. I now keep honeybees on a professional basis (Here is a link to my website) so Degsy works as my "Promotion vehicle".  It carries my equipment and stock for outdoor events. Last year I started doing "Experience days" where folks come out to my hives to looking inside at the honeybees. It occurred to me that the logistics to get the customer from the car park to the apiary (the place where the bees live) was a trifle awkward. It requires a five minute walk whilst I drive ahead with all the gear. Its not ideal. I decided what I needed was some with four wheel drive that seat several people. It took quite a while for the penny to drop. Why not convert the back of Degsy? I knew that there were Land Rover after market suppliers of bench seats. I priced them up, I needed two sets. I was surprised to find they were super cheap for brand new equipment. I order two sets and went off to Craddock's to collect them the very next day.


   The seats lived in the garage for a few weeks until I got time to spend on the refit. It is surprising how much stuff fits in the back of am 88" (short wheelbase) Land Rover. For once I decided to read the instructions first. They where no help. Landys come with slots and square cut outs in the rail at the top of the tub. Whatever I did I could not get the right combination of bracket and slot. My knees where aching by the time I sussed it out. Then it kind of fell into place. A tip for you...arrange the brackets so the dog legs face inwards on both seat uprights. The back of the seat is retained by the horns of the brackets locating into the slots in the rail. The feet on the bottom of the back rest are bolted to the wheel arch. Just beware of any wires that might be on the underside the wheel arch. Next to fit the seat base. It is hinged so it can be folded up. It was a bit fiddly getting the washer in between the seat back and seat base other wise it was straight forward enough. The seat bolster is secured to the seat base with two braided cotton tape which are tied to the frame of the seat back. Not sophisticated but it works. The last thing was to rivet the braided nylon with the hook on that retains the seat when it is folded up. Luckily the rivet gun was in the tool chest. A couple of squeezes and the rivet was set.

The I just had to do it all over again on the other side of the cab. One thing I had not envisaged was that the hi-lift jack (orange) would have to find somewhere else to live. It usually was strapped to the side wall at the top of the tub just where the back of the new seat rests. As luck would have it there is a space at the forward edge of the bench in front of the tub bulkhead. I even gave the tub a sweep out. I think a wash is needed though.

   Since it is MOT time I would go mad a shell out on a gasket for the rocker cover. I forgot to ask for the gasket when I collected the seats. As I was just about walk out the door I remembered. I did the walk of shame back to the spares desk to ask for the item. The chap got the item from stores and sent me on my way without having to pay. Apparently they are cheap as chip and could not be bothered to ring it up...kudos Craddocks.

   Final job, install the bulbs in the number plate light mount. The work of seconds. I put the replacement exhaust section in the back of Degsy so the mechanic can fit it before the MOT. (see previous post Getting-ready-for-mot-2017 ,otherwise Degsy is ready for his annual date with destiny.

         



Wednesday, 3 March 2010

Little jobs

It seemed to take an age for Saturday to come round. Since last week the posty has been a regular visitor to the house with packages with little goodies inside. Degsy's dash was in the same state as I had left it the week before i.e. in bits.

I started with a trial fitting the choke cable to the ignition switch block. It did not fit. I got the file out and whittled the collar away until it fitted into the carrier on the switch block. It was hard on my hands but I got there. H brought me a brew to keep the brain going. Next was to attach the wires to the new ignition switch. I read the manual and did as it said. However as soon as I put the key in the ignition the engine cranking. That was wrong. I had taken a picture of the back of the old switch the week before. I reconnected the wires according the picture and bingo the switch worked as it supposed to.

Next was to fit the ignition switch to the steering column. With the key out of the ignition barrel the steering lock tag was exposed. Putting the tag into the slot in the steering column provided the position for the ignition block on the column. I had already pulled the original choke cable out of bulkhead. At this stage of the game Degsy had THREE choke cables. The original cable which corroded to death. The second was the replacement for the original and now I had a replacement for the replacement. I pulled out the original cable and in positioning the ignition switch, fed the new choke cable through the bulkhead where the old choke cable had been. It all went together quite well. I eased the wires and threaded them to be less of bird's nest behind the dashboard before reconnecting them to the ignition switch. Then I tightened up the bracket securing the ignition block whilst making sure the steering lock and ignition switch continued to work until the sheer bolts......sheered. The next job was to reconnect the indicator switch and again reroute the wires to reduce the bird's nest. I replaced the dash lights bulbs whilst the dash was out then replaced the dash and eased the wires behind the dash as I screwed it home. I checked all the switches and found that the blower now worked but only on a single speed. I single speed is better than the previous zero speed.

Steering wheel next. Well actually the steering wheel binnacle. That was a faff but still only a few minutes of messing out. Then the steering wheel proper. No problem as I must have fitted it more than a dozen times. This time on dismantling the steering wheel the last time I had remembered to put a pencil mark to assist me in repositioning the steering wheel correctly.

I popped up the bonnet. I disconnected the current choke cable from the carb. After a moments thought I pulled out he cable inner and a snipped off the outer sleeve. I did not remove what was the existing choke pull from the bulkhead as it would be leave another hole. I had two or three goes at routing the new choke cable round the engine bay to find nice clean route. Having found the best route I secured the sleeve and inner to the choke levers. It all just fitted together. It was noticeable that the choke butterfly sat up vertically where the old cable made the butterfly lean over. I think that in leaning over it was also engaging the enriching choke jet.

The tiny jobs left to do was were really easy.
A. to replace the radiator header tank cap [10 seconds]
B. fit new the washer bottle cap. [30 seconds]
C. Vacuum tube [30 seconds]

Fitting the washer bottle cap required me to take off part of the washer feed pipe so water had to be pumped through to make the washer jets work. When I tried the wipers the left one started working properly, go figure.

I pulled out the choke cable turned the key and Degsy burst into life without any hesitation. The engine sounded really "fruity". I had to go out and took Degsy. The engine revved freely and pulled more strongly and even than before. Having run round for an hour or so I checked the end of the exhaust pipe. It was biscuit brown rather than sooty as it had been before. The fuel gauge was telling the same story, fuel consumption is down.

It was a pleasant couple of hours fettling Degsy. There are still a few little items to resolve but the engine works well and that is a big thing.